Enter a key word, then click on the "OK" button to start a search on our site.  
   
 
 
 
Deutsch
Français
Home > Products and Services > Resale > Pressure sensors
Version imprimable
Envoyer cette page à un ami
 
 
Pressure sensors
 
 

 

 

FROM TUBELESS TO TPMS

Over the past years, there has been a strong increase in the demand for electronic equipments to assist driving and security. Tyre pressure is an important security element because it impacts the way the car holds the road. In 2000, American legislation (TREAD Act) obliged all the car manufacturers to equip the new vehicles with a system to inform the driver if a tyre is not inflated enough. If a tyre is under-inflated, the fuel consumption goes up to 6%. Considering this fact, European Commission has just decided to make this system compulsory from November 1st, 2012.



"Clamp-in" Schrader valve


Variable angle Schrader valve valve snap-in TPMS
"Snap-in" Schrader valve


V.D.O. valve


BERU valve 

 
Reprogramming tool kit 65144
   

   
Torque wrench 65062


"AirAware" kit 65594  

 

PRESSURE SENSORS (RTPMS)

Since 1991, Schrader has been working on the development of its on-board pressure control system.
Schrader plays a part in vehicle safety developments in partnership with manufacturers and the RTPMS has become series equipment on numerous vehicles.
In the resale market, Schrader sells a complete range of kits and special tools for electronic valves.

 

CAUTION:

- Change the core and rubber grommet systematically each time you remove the tyre. 
- Use only a nickel plated core to avoid oxidization. 
- The nickel plated core torque of 0.25 N.m has to be respected.
- The recommended nut torque has to be respected.

 

1/ ON-LINE CATALOGUE:

Click to Reach our pressure sensors catalogue


 

2/ SCHRADER SENSORS:

-Complete aluminium "clamp-in" type valves fixed to a plastic cased housing (grommet seal or conical seal).

- Complete aluminium valves with varible angle, fixed to a plastic cased housing.

- Complete rubber "Snap-in" type valves

3/ V.D.O. SENSORS:

Complete flexible valves connected to an electronic circuit. (**)

4/ BERU SENSORS :

Complete aluminium valves available in several length. Sensors have to be ordered separately. (**)

5/ TOOLS:

A complete range of diagnostic and reprogramming tools, torque wrenches especially designed for tightening the pressure sensors nuts, Torx tools for "snap-in" screws.

6/ SCHRADER TPMS RETROFIT KIT   

Schrader proposes an Aftermarket TPMS system for passenger cars without equipment of origin. It includes a Dash-mounted receiver/display with 4 wheel-mounted transmitters (approved in 1st Equipment by car manufacturers).

 7/ PDF DOCUMENTS AND INFORMATION:   

 

 

 

 

 

Leaflets

 

Mounting Instructions

General information
and tools (PU-116)

Voir le PDF

 

Schrader "Clamp-in" valves

Voir le PDF

TPMS chart per vehicle
(PU-144)

Voir le PDF  

Schrader "Snap-in"
valves

Voir le PDF

Snap-in TPMS valve 
(PU-111)

Voir le PDF

 

V.D.O. valves

Voir le PDF

Diagnostic tool

Voir le PDF

 

BERU valves

Voir le PDF

"AirAware" Kit (PU-112)

Voir le PDF

  Technical Bulletin   Voir le PDF

 

 

 

 

 

 
Home Contact us Site map Links Legal information